Samsung and Google Pixel devices also support both Wi-Fi 5 (802.11ac) and Wi-Fi 6 (802.11ax) standards. Here’s a breakdown for recent models: Samsung: Google Pixel: The actual performance benefits of Wi-Fi 6 will depend on the network infrastructure and the capabilities of the router or access point. For optimal Wi-Fi 6 performance, it’s recommended to…
Author: abnadmin
Difference between Wi-Fi 5 and Wi-Fi 6
The main differences between Wi-Fi 5 (802.11ac) and Wi-Fi 6 (802.11ax) lie in their performance, speed, capacity, and efficiency. Here’s an overview of the key distinctions: 1. Speed and Throughput:Wi-Fi 5: Wi-Fi 5 supports a maximum data transfer rate of up to 3.5 Gbps in ideal conditions. It operates on the 5 GHz frequency band…
Dual-Band vs Tri-Band Access Points
The main differences between dual-band and tri-band wireless access points (WAPs) lie in the number of available frequency bands and the potential for increased network capacity. Here’s an overview of each: 1. Dual-Band Wireless Access Point:A dual-band WAP operates on two frequency bands: 2.4 GHz and 5 GHz. These bands have different characteristics that can…
Post 1: Intro to routers and wifi basics; NSA Best Practices
Intro This week we are going to talk about the types of equipment you need for your new FTTH high-speed internet connection and how they relate to some NSA best practices. We will then look at the difference between all-in-one “plug and play” router+wireless devices compared to purchasing separate devices. Finally, We will look at…
Current GridMaster Maps
Below are my current GridMaster Maps as of 6/3/23. Only 3 left (DN37, DN02 & DL88) for the AMSAT GridMaster award! Thanks, Rovers🚙🚗!!! Here is KE4AL’s original GridMaster post. I have updated the Google Sheets map to include some other areas, take a look HERE. I got a lot of these grids from following @GridMasterHeatMap…
VPN Networks
A VPN (Virtual Private Network) is a secure and encrypted connection that allows you to access the internet or other private networks while maintaining privacy and security. It creates a private tunnel between your device and the VPN server, encrypting your internet traffic and routing it through the server before reaching its destination. Here are…
Managed Vs. UnManaged Wireless Networks
The main difference between a managed and unmanaged wireless access point (WAP) lies in the level of control and features they offer for network management. Here’s an overview of each: 1. Unmanaged Wireless Access Point:An unmanaged WAP is a basic plug-and-play device that operates independently without any centralized control or management interface. It provides a…
WPA2, WPA3 and Wireless Network Security
WPA2 (Wi-Fi Protected Access 2) and WPA3 (Wi-Fi Protected Access 3) are security protocols used to protect wireless networks from unauthorized access and secure the data transmitted over them. Here’s an overview of both protocols: 1. WPA2:WPA2 is the predecessor to WPA3 and has been widely used as the primary security protocol for Wi-Fi networks….
Mesh Networks and Extending Wireless Coverage
A mesh network is a type of wireless network architecture that consists of multiple interconnected devices, called nodes, working together to extend wireless coverage. Unlike a traditional wireless network setup where devices connect directly to a central access point, a mesh network allows devices to communicate with one another and dynamically route data between nodes…
Carrier-grade Network Address Translation (CGNAT)
Carrier-grade Network Address Translation (CGNAT) is a technique used by internet service providers (ISPs) to alleviate the shortage of available public IPv4 addresses. Due to the exponential growth of internet-connected devices, the pool of available IPv4 addresses has become limited. CGNAT allows multiple customers to share a single public IPv4 address by translating their private…